17
2> Set the sequence number by pressing soft-key [Previous Step] or [Next Step];
3> Select one or more fixtures for the sequence. You can draw a selection box to select multiple fixtures;
When [Step Increment=0], draw a selection box to select fixtures can set them all in the same sequence
number;
When [Step Increment=1], the sequence number of the fixtures selected by drawing a selection box
increase 1 automatically. The sequence number increases according to the drawing way of the selection box;
4> Repeat the steps 2> and 3> until finished setting;
5> Press the key [Save and Return] to save and exit.
To Next Page
Loading...