WPS
LAN
Audio in/out
Power
Reset Button
Antenna
Induction IC
LENS
Infrared Lamp Array
V1.6
EQ980306
Package Contents
Quick Installation Guide
Outdoor HD P2P IP Camera
"Foscam" App download
1 Hardware Introduction
Physical Description
Hardware Installation
Hardware Connection
FI9803P
FI9803P
FI9900P / FI9800P
FI9900P / FI9800P
Quick Installation Guide
Wi-Fi Antenna
Resource CD
Ethernet Cable
Power Adapter Mounting Bracket
(only FI9803P)
Model: FI9803P Model: FI9900P / FI9800P
IP Camera
Warranty Card
LAN
Audio in/out
Power
Reset Button
Antenna
Induction IC
LENS
Infrared LED
Quick Installation Guide
Outdoor HD P2P IP Camera
Model: FI9803P Model: FI9900P / FI9800P
Method 1: Wired Connection
You can use wired connection to add the camera via the
app or browser. Connect the camera to the wireless
router via ethernet cable.
Method 2: Wireless Connection
You can also use wireless connection to add the camera
via the app. But ensure that the camera has not been
plugged ethernet cable.
1. Screw the mount on the wall with the 3 screws
provided.
2. Install the camera on the mounting bracket with 1
screw to complete installation.
WPSWPS
Please Note:
Ensure that the rain or water will not reach the
connector ports at the end of the pig tail wiring.
These connectors are not weather-resistant.
Fixate the camera on your preferred location and use
screws to mount it. We have provided screws in the
packaging.
Security Warning
Foscam cameras and NVRs require good security
practices to safeguard your privacy. You should
regularly change your camera or NVR password
which is 8-10 numbers, letters, symbols combination.
You should update your camera or NVR regularly.
Make sure your camera or NVR has the latest
rmware installed for your specic model and better
experience.
Before you continue, please note:
Ensure your wireless router is on and functioning.
Ensure your smartphone and camera are both connected
to the same wireless router.
0~90°
0~90°
0~360°
0~360°
0~360°
0~360°
To Next Page
Need help?
General
