Need help?Do you have a question about the Foscam FI8905E and is the answer not in the manual?
General| Maximum resolution | 640 x 480 pixels |
|---|---|
| Supported video modes | - |
| Minimum illumination | 0.5 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/4 \ |
| Optical zoom | - x |
| Fixed focal length | 6 mm |
| Video motion detection | Yes |
| Built-in HDD | No |
| LED type | IR |
| Night vision distance | 30 m |
| Number of illumination LEDs | 60 |
| Type | IP security camera |
| Certification | CE, FCC |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Form factor | Bullet |
| Product color | Silver |
| Protection features | Water resistant |
| Compliance industry standards | IEEE 802.3af |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Cabling technology | 10/100Base-T(X) |
| Power source type | PoE |
| Power consumption (typical) | 15.4 W |
| Storage temperature (T-T) | -10 - 60 °C |
| Storage relative humidity (H-H) | 0 - 90 % |
Weight and Dimensions| Package weight | 953 g |
|---|
Details the interface for logging into the camera's software.
Describes the main viewing window and its interactive elements.
Configures static IP address, subnet mask, gateway, and DNS.
Configures Dynamic DNS to access the camera via a domain name.
Manages motion detection, sensitivity, and alarm actions.
Details the process for updating the camera's system and web UI firmware.
Instructions for installing and using the Foscam app on Android devices.
Instructions for installing and using the Foscam app on iPhones.
To Next Page
