Foscam FI9900P User Manual (English)

To Next Page

Package Contents

2 Physical Description

Security Warning

Please change the password of your Foscam APP account and

camera username regularly, the password should be the combination

of numbers, letters and special characters.

Please keep the username and password of your camera and Foscam

APP account safe.

Please update your camera to the latest rmware every three

months, which make you have better product experience and ensure

the safety of your camera.

1 Installation Notice

3 Access IP Camera via APP

Make sure your router is enabled DHCP, and connected to internet.

Make sure your smartphone is connected to your router and located

near the camera.

Before you continue, please note:

Foscam

You can experience new features, including EZLink, Online-Update,

Message Push, etc., ONLY on “Foscam” APP. Any other third-party

APP, other than “Foscam”, can’t support all these new features.

Note:

If you have added your IP camera successfully by wired connection,

please do not add it again by wireless connection.

Please put the QR code within the frame. Put the

barcode outside the frame to avoid interference.

Album

Scan

Tap here Scan the QR code

Tap ‘+’ to add new camera

Add New Camera

My Cameras

Tap to scan QR Code

Please scan the QR code on

your camera to add.

Setup Wizard

轻触扫描二维码

√

Connection succeeded！

Tap the camera in the list to

watch live video.

Setup Wizard

Connection succeeded!

Tap here

V1.9

EQ980314

Quick Installation Guide

Outdoor HD IP Camera

Model: FI9803P Model: FI9900P / FI9800P

Wi-Fi Antenna

Resource CD

Power Adapter

IP Camera

Mounting Bracket

(only for FI9803P)

Quick Installation Guide

Outdoor HD IP Camera

Model: FI9803P Model: FI9900P / FI9800P

LAN

Power

Reset Button

Antenna

Induction IC

LENS

Infrared Lamp Array

FI9803P

FI9900P / FI9800P

LAN

Audio in/out

Power

Reset Button

Antenna

Induction IC

LENS

Infrared LED

WPSWPS

It recommends that the smartphone has the following conguration:

1. Only use the “Foscam” APP.

2. IOS: system version 8.1 and above.

3. Android: systetem version 4.1 and above, and the

smartphone has a Graphics Processing Unit (GPU) function.

3.1 Wired Connection (recommended)

Warranty Card

WARRANTY CARD

~~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~

Live Video

Setting & Monitoring

Change Camera

Username & Password

Download APP

Wired Connection

(Recommended)

Wireless Connection

Download and install Foscam APP from Apple APP Store or Google

Play Store, or scanning the QR code to download and install directly.

1. Connect the camera with power adapter.

2. Connect your camera with router by Ethernet cable.

3. Make sure your smartphone is connected to your router.

4. Run the Foscam APP on your smartphone, register a Foscam

Cloud account then log in. Please follow the steps below to add your

camera.

Need help?

Do you have a question about the Foscam FI9900P and is the answer not in the manual?

Foscam FI9900P Specifications

General

Type	IP security camera
PTZ control	-
Certification	CE, FCC
Placement supported	Outdoor
Connectivity technology	Wired & Wireless
Sensor type	CMOS
Optical sensor size	1/3 \
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Video formats supported	H.264
Minimum illumination	0 lx
Fixed focal length	2.8 mm
LED type	IR
Night vision distance	20 m
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms	WEP, WPA, WPA2
Power over Ethernet (PoE)	No
Power consumption (typical)	5 W
Mobile operating systems supported	Android, iOS
Form factor	Bullet
Product color	Silver
Protection features	Water resistant
International Protection (IP) code	IP66
Operating temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	RoHS