Need help?Do you have a question about the Foscam FI9816P and is the answer not in the manual?
General| Model | FI9816P |
|---|---|
| Category | Security Camera |
| Type | IP Camera |
| Image Sensor | 1/4" CMOS |
| Audio | Two-way audio |
| Wireless Security | WEP, WPA, WPA2 |
| Motion Detection | Yes |
| Resolution | 1280 x 720 |
| Lens | 3.6mm |
| Connectivity | Wi-Fi, Ethernet |
| Storage | Micro SD card |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Compatibility | iOS, Android |
| Pan/Tilt Angle | Horizontal: 300°, Vertical: 120° |
| Power Supply | DC 5V, 2A |
Identifies components on the front (speaker, lens) and rear (ports, lights) panels.
Steps for connecting camera hardware and installing the IP camera tool software.
Using LAN IP with HTTP (88) or HTTPS (443) ports for local camera access.
Accessing camera via WAN IP and port, especially for static IP configurations.
Setting IP, UPnP, and DDNS for simplified remote camera access.
Explains the username, password, stream, and language settings on the login screen.
Description of FOSCAM logo, Live Video, Settings, and Playback buttons.
Information on monitoring multiple cameras simultaneously in the multi-device window.
Settings for camera mode (50/60Hz), stream, mirroring, and flipping the image.
Understanding and adjusting stream type, resolution, bit rate, and frame rate.
How to add timestamp and device name overlay on the video feed.
Explanation of the directional buttons for controlling camera pan and tilt movement.
Introduction to setting up and managing camera cruise tracks for automated movement.
Details on selecting, adding, and deleting cruise tracks for camera movement.
How to set, save, and recall specific camera positions using preset points.
Overview of status columns: Device Info, Device Status, Session Status, and Log.
Displays camera model, name, ID, time, and firmware versions for identification.
Shows alarm, record, SD card, network, and WiFi status.
Displays active users and their IP addresses currently accessing the camera.
Records user access, IP addresses, and login/logout events for audit.
Setting the camera's unique name and internal system clock.
Configuring main and sub stream video settings for different network conditions.
Understanding and adjusting stream type, resolution, bit rate, and frame rate.
How to add timestamp and device name overlay on the video feed.
Setting the storage path for alarm and manual recordings (SD card/FTP).
Adjusting pre-record and alarm record time durations.
Enabling local alarm recording and setting its time.
Saving current settings to a file and restoring them later.
Guide to installing browser add-ons required for camera viewing.
To Next Page
