Click Multi-Device Settings. Choose The 2nd Device. Fill in the 2nd camera’s name, DDNS domain name,
port number. Enter user name and password and then choose Add. (Figure 4.16)
1 ---- The camera model: MJ or H264.
2 ---- The 2nd camera’s name
3 ---- Fill in the 2nd camera’s DDNS host not LAN IP
NOTE:
The MJ series have the same HTTP Port NO. and Media Port NO.
4 ---- Enter the 2nd camera’s user name and password
5 ---- Click Add button and to take effect
NOTE:
Here the Host must be entered as the second camera’s DDNS domain name, not its LAN IP.