3) Outdoor Mode------Outdoor surveillance
Stream
The default stream supports multiple modes, For example: HD Mode/VGA/15fps/512K meanings: Stream type
/ Resolution / Maximum frame rate/ Bit rate. (Different models support different specific mode. )
Bit rate.
1) Stream type: It is used to identify the stream type.
2) Resolution
There are two resolutions, the bigger one is 720P, and the smaller one (VGA) is 640x480 pixels. The bigger the
resolution, the better of the image quality is. If you are accessing the camera via internet and want to get more
fluent video streaming, please select resolution VGA.
3) Maximum frame rate
You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can
achieve fluently video.
4) Bit rate
Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should
combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will
lead to video can not play well.
You can reset the stream type on Settings-> Video-> Video Settings panel.
Figure 3.9
After changing, please re-login the camera and you can see the modification.
Section4 Pan/Tilt Control
To Next Page
Loading...
