Follow Us On Social Media Limited Lifetime Warranty
Recycling the Product
FCC Information
This Fosmon product includes a limited lifetime warranty.
Please visit our Fosmon website for more details.
www.fosmon.com
support@fosmon.com
© 2018 Fosmon Technology. All rights reserved.
To dispose this product properly, please follow the recycling process regulated in your area.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
DO NOT RETURN THE PRODUCT
There are good days and there are bad days. It is our BAD if the
product is not working, or if you are not happy with it.
PLEASE
GIVE US A CHANCE and WE WILL MAKE IT RIGHT.
1-833-3-Fosmon (833-336-7666)
(612) 435-7508
support@fosmon.com
Instructions
1. To Program
• There are 48 push buttons around the dial. Each is for a period of 30 minutes.
• When a push button is pressed down, the appliance connected to the timer will be on during that period of time.
• When a push button is lifted up, the appliance plugged into the timer will be o during that period of time.
2. Set Time of Day
• Turn dial clockwise one full revolution then advance until arrow points to the current time.
• The dark area denotes PM and the white area denotes AM.
3. To Activate/Deactivate The Timer
• Turn the dial following the arrow’s direction till the mark pointing to the current time.
• Press down the pins according to the working duration of home appliances as expected. In contrast, lift up the pins, the
home appliance will be o during that period of time (total 48 pins setting dial/30 minutes interval, adjustable for 24hr).
• Plug the timer into wall outlet and then plug home appliance into the timer.
• Turn on home appliance and start to work as expected timer settings.
To Previous Page
Loading...