Waterproof True Wireless Stereo Bluetooth Speaker
Disclaimer Statement:
FosPower shall not be liable to you or anyone else for any loss, injury, hearing damage for any damage relating to this
product. FosPower is not liable for any damage or destruction to consumer electronics devices or other personal property
that are contained inside or outside the FosPower product, including, without limitation, laptops, cellular phones, or other
handheld devices, or any loss of data contained in the foregoing devices.
Thank you for purchasing this FosPower product. For optimum performance and safety, please read these instructions
carefully before connecting, operating or using this product. Please keep this for future reference.
FosPower Waterproof True Wireless Stereo Bluetooth Speaker is a portable speaker that produces great sound out of a little
package. This device can be used indoor and outdoor. It is also waterproof, allowing you to use it while swimming, bathing,
and more.
Package Includes:
1x Bluetooth Speaker
1x Micro-USB Cable
1x Metal Carabiner
1X Quick Start Guide
Specications:
Bluetooth Version V4.2
Rated Power
Waterproof Rating
Battery Capacity
Power Supply
Frequency Response
Receiving Range
Driver Unit
Charging Port
5W(RMS)
IPX7
900mAh L-ion
DC 5V/1A
115Hz-15KH
≤30M
4Ω5W/53mm
Micro-USB
Play Time Up to 10 Hours
Charge Time 3 Hours
Product Diagram:
Microphone
LED Indicator
Volume Up/
Next Song
Play/Pause
Pick Up/Hang Up Call
Volume Down
Previous Song
On/O/Pair
Buttons/Controls:
(Please note, it is recommended to fully close
back panel ap for waterproof eectiveness)
Back Panel
Micro SD Card Slot
Charging Port
Power On/O
1. Press and hold On/O button to power on/o
the speaker.
Bluetooth Pairing
1. Turn on speaker (LED will ash blue)
2. Go to Bluetooth settings on your device
3. Locate device FOSSP-2369 and select to pair
4. When pairing is successful you will hear a sound and
the LED will stay solid blue
Pairing two FOSSP-2369 speakers together (TWS mode)
1. Disconnect Bluetooth speaker from device and power speakers o
2. Power on both speakers and double click the On/O button
3. The two speakers will begin to search for each other and should pair
automatically under the TWS mode.
4. While in TWS Mode, you can use commands on either speaker to toggle
functionality for both.
5. To disable TWS Mode, double click the On/O button.
To Next Page
Need help?
General