Foster HR150-A - Standby and Controller Navigation; Set Point Adjustment; Loading and Airflow Management; Door Lock Operation

EnglishEnglish
Standby
Pressing the power switch for 5 seconds will turn the unit on or into standby. When in standby the display will
show .
Accessing the Info Menu
Press and immediately release the ‘ ’ buon then using the and buons select the data you wish to dis-
play the value of. When at the desired point press and hold the ‘ ’ buon to display the value.
Press the buon or leave the controller for 30 seconds and the unit will exit the ‘Info’ menu and resume
displaying the current temperature.
Set Point
To amend the set point press and hold the ‘ ’ buon for half a second. Then while keeping the ‘ ’ buon pressed
use the and buons to set the desired value.
When the ‘ ’ buon is released the new value will be stored automacally.
Keypad Security Sengs
This funcon avoids unauthorised controller access.
Press & release ‘ ’ then use to select ‘ ’. Press and hold ‘ ’ to change from ‘ ’ to ‘ ’. Leave for 10
seconds or briey press to resume.
Internal Light (where ed)
The on/o switch is located on the front of the light ng.
Shelves, Supports & Drawers
Shelves - ‘H’ models are supplied with sloed removable shelf supports.
The only ‘L’ models that have xed shelves that are part of the freezer system and cannot be removed are
the LR150-A & XR415L, all other ‘L’ models have removable shelves.
Refrigerated Drawers - can be removed by pulling out to their full extent and liing so that the roller passes
through the slots in the drawer runner. Please ensure drawers are ret to their original posion.
Food
Cover all foods and separate raw and cooked foods to avoid cross contaminaon.
Loading and Airow
Each shelf or drawer is capable of holding up to 25kg of product evenly distributed
Always ensure the air can circulate around/through the stored product.
It is important that for opmal energy performance that adequate airow is maintained around the perimeter
of the shelves, and around all stored products.
On all models please ensure that no product is placed on the unit base.
Door Lock (Where Fied)
To lock the door insert the key and turn 90°, turn in the opposite direcon to unlock.