Pic. 3
Pic. 4
Programming your oven with mechanical
60 minutes timer - Pic. 3
The regulating knob (pic. 3) must be turned in
a clockwise direction until it reaches the 60
minutes position and then turned to the
desired time by turning the knob in a counter
clockwise direction.
The oven will not be turned off automatically.
A minute counter ringing will advise that the
cooking time is over.
Programming your oven with electrical 120
minutes cut-off timer - Pic. 4
The function of the programming timer is to
turn on the oven for a pre-determined amount
of time.
1. OPERATING
After having set the oven switch knob at the
desired temperature, turn the timer knob in a
clockwise direction to the desired cooking time
(maximum 120 minutes).
When the timer will return to position "O“, a
minute counter ringing will advise that the
oven will automatically turn off.
2. MANUAL POSITION
If the cooking time is longer than the 2 hours
programme, or if you wish to use the oven
manually, to turn it off when you desire, turn
the knob to position (Pic. 4).
15
To Next Page
Loading...
