Need help?Do you have a question about the Fostex 454 and is the answer not in the manual?
General| Brand | Fostex |
|---|---|
| Model | 454 |
| Category | Music Mixer |
| Language | English |
Read, retain, and heed all safety and operating instructions provided for the appliance.
Details input/output impedance, nominal, minimum, and maximum levels for various jacks.
Covers frequency response, signal-to-noise ratio, and total harmonic distortion.
Includes power requirements, physical dimensions, weight, and phantom power supply.
Explains TRIM, Input Selector, AUX input selectors, and AUX level/pan controls.
Details Assign Switch, Buss Pan Pot, Parametric EQ, and PFL functions.
Covers Input Fader, Master Faders, Buss Gain/Pan, and Monitor/Meter Selectors.
Details PFL, Monitor, Headphones, and Stereo Master Level controls.
Details various input/output jacks like XLR, Tape, Insert, Buss, Stereo, and AUX.
Covers Phantom Power Switch, Meter Mode Selector, and LED indicators.
Describes Monitor Out, Headphones Jack, PFL LED, and Power LED.
Explains impedance matching for audio signals to prevent distortion or damage.
Guides on adjusting input levels using TRIM and PEAK/PFL LED for optimal gain.
Details using D.OUT, INSERT, AUX jacks for connecting effectors.
Shows how to connect effectors to individual input channels for direct sound processing.
Illustrates processing common effects across channels for positioning.
Explains the EQ's shelving and parametric bands for shaping instrument and voice timbre.
Details using the mixer as a PA system for halls, controlling sound reproduction and stage monitors.
Explains the mixer's role as a control center for multitrack recording processes.
Details connecting 4-channel buss outputs to 8-channel recorder inputs and using D. OUT jacks.
Guides on routing signals from channels to specific tracks via buss outputs and assign switches.
Explains listening to recorder input or recorder output signals for monitoring.
Details monitoring effects processing by sending AUX 2 OUT to reverb and returning to STEREO IN.
Explains monitoring recorded tracks and new sources for overdubbing using AUX 2 and monitor selectors.
Details stereo mixing of recorded tracks and assigning them to TRK 7/8 via STEREO MASTER OUT.
Describes applying effects to playback tracks and mixing to a master recorder.
Explains synchronizing MIDI sequencers and drum machines using the AUX 2 section as a mixer.
Provides solutions for input signal issues, no sound output, and channel effection problems.
To Next Page
