Fostex G24S - TABLE OF CONTENTS

TABLE OF CONTENTS
BASIC OPERATION
1. NAMES AND FUNCTIONS OF CONTROLS ..................................................................... 7
Front Panel .......................................................... .
Control Panel ....................................................... ’ g
Rear Panel .......................................... 14
2. CONNECTIONS ............................................................................... ZZZZZZZZ' 15
3. PREPARATIONS FOR RECORDING ................................................................................. 16
The Recording tape/Loading the tape ........................................ 16
4. RECORDING ........................................................................................................................... 17
1 ) Pre-check Recording Levels and Sound Quality .................... ......... 17
2) Recording/Playback ................................................ .
3) Overdubbing ..................................................... .
4) Punch-in/Out ..................................................... .
5) Cueing Mode .................................................... .
6) Spot Erase Mode ................................................... 20
ADVANCED OPERATION
1. CONTROLLER ....................................................................................................................... 21
Changing unit angle/Disconnection/Connection ................... 21
2. DISPLAYS .............................................................................................................. ’ 24
3. FUNCTIONS OF [RCL] [?] ............................................................................................. 25
1) [RCL] -♦ [n] / Cue Memory Recall ....................................... 25
2) [RCL] -> [PiTCH] / Display of Pitch Control ................................. 28
3) [RCL] -+ [METER] / Selection of Meter Display Mode .......................... 28
4) [RCL] — > [INPUT MON] / Selecting Individual INPUT MON 1 &2 ................... 30
5) [RCL] — > [J /Recall of Last Play Point ..................................... 31
6) [RCL] — > [LOCATE] / Recall of Location Memory ............................. 32
7) [RCL] -> [ZONE LIMIT] / Setup of Zone Limit Section .......................... 33
8) [RCL] -> [AUTO PLAY] / Display of Remaining Tape Time ...................... 35
9) [RCL] -> [HOLD] / Display of Zone Limit Section Length ........................ 35
10) [RCL] -> [+10] / Setting the Tape Base Thickness ............................ 35
11) [RCL] -> [AUTO RTN] / Setup of Auto Return Memory ......................... 36
12) [RCL] — > [-/PREROLL] /Setting of Preroll Time ............ 37
4. 2ND MODE FUNCTION ....................................................................................................... 38
1) Change of Initial Settings „ ... 3g
2) Sort Mode .............. 43
3) Direct Locate Mode .............................................. ” ” 45
4) Meter Display Mode ................................................ .
-4-