Fostex PM-2 - User Manual

professional studio monitor
PM-2
- Reference Manual -
Introduction &
Unpac
k
ing
Setup Instr
uctions - continued
Product Cleaning Instr
u
ctions
Setup Instr
uctions
Bac
k Panel Ov
e
r
view
Safety Instructions
Ca
b
le
and W
iring
In
f
o
rm
a
tion
Product Specifica
tions
Dec
lar
a
ti
o
n
of
EC Dir
ectiv
e
p-3
p-5
p-7
p-4
p-6
p-2
p-7
p-7
p-8
p-1

Fostex PM-2 Specifications

General

Type	Active Studio Monitor
Woofer Size	5 inches
Tweeter Size	1 inch
Tweeter Type	Soft dome
LF Amplifier Power	30W
Input Connectors	XLR, TRS
Input Impedance	10 k ohms

Summary

Safety Instructions

Introduction and Unpacking

Setup Instructions

Monitoring Distance

Set monitors at 1 to 2 meters for near-field listening.

Monitoring Height

Aim acoustic center at seated ear height.

Monitoring Angle

Position speakers 60 degrees apart for optimal listening.

Additional Information

Vertical mounting recommended for best performance and cooling.

Back Panel Overview

XLR & TRS Input

Electronically balanced input, compatible with -10dBV and +4dBu signals.

Gain Control

Adjusts input level to internal amplifiers.

Heatsink

Dissipates amplifier heat; requires proper ventilation.

Power Switch

Turns the amplifier section on or off.

IEC Power Input

Connects to a properly grounded three-pin power cable.

Low Frequency Adjustment

Boosts or cuts low frequency response at 60Hz by ±3dB.

High Frequency Adjustment

Adjusts high frequency response by +/-3dB above 5kHz.

Product Specifications

Cable and Wiring Information

Product Cleaning Instructions

Declaration of EC Directive