To Next PageTo Next PageWhy is the sound distorted on my Fostex X-12?
Sound distortion or clipping can occur if the input signal level is not appropriate. Adjust the [LINE-MIC] knob to set the optimum level for your input signal.
What to do if sound flutters or skips on Fostex Cassette Player?
Sound flutters or skips can be due to a dirty head or using the wrong type of tape. First, clean the head. Second, ensure that you are using a high-position tape.
Why can't I hear sound through headphones on my Fostex X-12?
If you cannot hear sound through the headphones, ensure that the [LINE OUT/PHONES] knob is turned up.
What to do if the REC button is not pushed in on Fostex X-12?
If the [REC] button is not pushed in, it may be because the write-protection tab on the cassette tape is broken. Place a strip of scotch tape over the broken tab to resolve this.
How to record to a specific track on Fostex X-12?
To record to a desired track, ensure that the [REC TRACK] selector is set correctly. Set the [REC TRACK] selector repeatedly until the desired track is selected.
Why Fostex X-12 power is not turned on?
Check the connection at the AC outlet and the [DC IN] jack of the X-12.
General| Brand | Fostex |
|---|---|
| Model | X-12 |
| Category | Cassette Player |
| Language | English |
Provides an overview of the Fostex Model X-12 multitracker and its capabilities for recording.
Comprehensive guidelines for safe appliance operation, maintenance, and user responsibilities.
Warnings and measures to prevent electric shock, including not removing covers or servicing internally.
Crucial advice on power adaptor use, cable safety, handling with wet hands, and internal component safety.
Recommendations for selecting a suitable operating location, avoiding hazards like heat, moisture, and vibration.
Explains how multitrackers differ from standard cassette decks regarding track usage and playback direction.
Guidance on choosing appropriate cassette tapes (C-90) and managing write-protection tabs for recording.
Warning against placing microphones too close to speakers to avoid feedback and hearing damage.
Caution against connecting output jacks directly to input jacks to prevent unwanted audio oscillation.
Detailed labeling of all switches, knobs, faders, and I/O jacks on the front and top panels of the unit.
Explains the power switch, record track selector, reset button, and the master output/headphone level knob.
Details the cassette tray, input level meter, and buttons for tape transport functions like REC, PLAY, PAUSE, STOP, FF, REW.
Describes recording/power indicators, individual track playback faders, and stereo image (PAN) control knobs.
Explains the LINE-MIC gain control, input/headphone jacks, and common audio plug types used with the X-12.
Steps for connecting power, inserting tape, connecting audio sources, and powering on the device.
Instructions on how to forward the tape to the magnetic part and reset the tape counter before recording.
Process of selecting the desired track and adjusting input gain using the LINE-MIC knob and level meter.
Guidance on entering record standby mode, starting recording, pausing, and stopping the recording process.
Steps to rewind the tape to the beginning and start playback of recorded tracks.
How to use playback faders and PAN knobs to adjust volume and stereo positioning for each track.
Defines overdubbing as layering new performances onto existing recorded tracks.
Illustrates a multi-step process for overdubbing bass, keyboard, and vocals onto separate tracks.
Steps for setting up, connecting the bass, adjusting levels, and rehearsing the performance with track 1 audio.
Detailed instructions for selecting track 2 and recording the electric bass over the existing track 1 recording.
Table providing specific switch and knob settings for overdubbing keyboard to track 3 and vocals to track 4.
Explains how to use the PAN knob to adjust the stereo balance for monitoring and recording sounds.
Describes mixdown as combining multi-tracked audio into stereo and copying to a master recorder.
Steps for setting up the master recorder and adjusting levels for the final mixdown process.
Guide to recording music from external sources onto tracks 1 and 2 for overdubbing.
Instructions for adding your own performance or vocals to pre-recorded music tracks 3 and 4.
A table detailing common problems, their causes, and recommended corrective actions.
Procedures for cleaning the unit's exterior, recording head, pinch rollers, and demagnetizing.
Provides comprehensive technical data including frequency response, impedance, power, dimensions, and accessories.
A visual representation illustrating the audio signal path and internal circuitry of the X-12.
Lists specifications for various Fostex headphones recommended for use with the X-12.
Lists specifications for Fostex microphones suitable for connection to the X-12.
Declares the equipment's adherence to European EMC and Low Voltage Directives.
Provides contact information for Fostex distributors located in various European countries.
