Need help?Do you have a question about the Fotona QX MAX and is the answer not in the manual?
General| Laser Type | Q-switched Nd:YAG |
|---|---|
| Repetition Rate | 1-10 Hz |
| Wavelength | 1064 nm and 532 nm |
| Spot Size | 2-10 mm (adjustable) |
| Fluence | Adjustable, depending on spot size and energy output |
Details laser wavelengths, output energy, pulse width, and classifications.
Covers power requirements, electrical connection, and equipment class.
Explains mains inlet, auxiliary supplies, and power distribution.
Describes Controller, PFM Module, Cooling System, and Laser Head.
Details housing features, filters, and beam delivery system.
Guides for removing console covers and laser head cover.
Procedures for replacing Charger, PFM Module, and Cooling System.
Instructions for replacing the controller and laser module parts.
Guides for replacing flash lamps and the laser rod.
How to access service mode using the system's front panel.
Using external PC for advanced diagnostics and parameter editing.
Explanation of firmware parameters for Nd:YAG and KTP lasers.
Procedures for measuring earth, enclosure, and patient leakage currents.
How to measure protective earth impedance according to standards.
Detailed steps for aligning laser mirrors and optical components.
Procedures for aligning the aiming laser and KTP assembly.
Procedures for calibrating Nd:YAG and KTP energy meters.
Comprehensive steps for precise articulated arm alignment.
Explains various advisory messages and required user actions.
Lists error codes and their corresponding troubleshooting steps.
Addresses issues not generating system error messages.
References to electrical wiring and optical path diagrams.
List of part codes and names for ordering replacement components.
To Next Page
