23
• This equipment is intended to be used in building
inspections, utilities, R&D, and the manufacturing
industry.
• It is very important to adjust the focal length correctly.
An incorrect focal adjustment will aect the imaging
quality and temperature measurement accuracy of the
thermal imager.
• The thermal imager has a resolution limit, which
depends on the detector size, lens, and distance to the
object. If necessary, please move closer to the object.
Stay away from hazardous areas or energized electrical
components
• Be careful when using the thermal imager
perpendicular to the target, because you may become
the main radiation source of infrared ray.
• Please choose a high-emission area (for example, an
area with rough surface) for measurement.
• Blank objects (and objects with low emissivity) are
mainly reected in the environment, so they may
appear wrong result in the thermal imager.
• Various types of faults (such as faults that occur in
building construction) may generate the same type of
heat distribution pattern.
• Analysis of the infrared images requires corresponding
professional knowledge.
* This manual may be inconsistent with the product due to
product upgrade or customization; please always refer to
the specied product.
Tips
To Next Page
Loading...