Foundations Gaggle - Seat Harness Installation and Adjustment; Step 1; Step 2

Figure 1
AB20045_G6
A
B
C
D
SEAT HARNESS INSTALLATION AND ADJUSTMENT
STEP 1
Harness routing:
Route clip A through seat back lower
hole B .
Route Harness anchor D though center
seat hole C . Pull back up on crotch
strap to lock in anchor.
See Figure 1 for routing.
AB20045_G7
A
F
E
Harness routing:
Route clip A through infant seat
back upper hole E .
Connect clip A to main buckle at clip hole
F .
See Figure 2 for routing.
STEP 2
Figure 2
3