Page 10
TROUBLESHOOTING
TROUBLE LOOK FOR REMEDY
Poor Spray Pattern 1. Tank is not pressurized.
2. Nozzle partially clogged.
3. Nozzle damaged.
4. Shut-o clogged.
1. Turn on Pump.
2. Clean Nozzle. See Nozzle
Maintenance.
3. Replace Nozzle.
4. Clean Shut-o. See Shut-o
Maintenance.
Battery will not Charge. 1. Charger not plugged into
outlet.
2. No lights illuminated on Pump.
Charger plugged into outlet.
3. No lights illuminated on Pump.
Charger plugged into outlet,
outlet functioning.
4. Red light continues ashing on
Pump (Battery temperature too
high for safe charging).
5. Red and Green lights ash
alternately on Pump (Battery can-
not be charged).
1. Plug Charger into outlet.
2. Check that outlet is function-
ing.
3. Replace Charger.
4. Allow Pump to cool.
5. Replace Pump.
To Next Page
Loading...
