Fountainhead D.B.Smith

Questions and Answers

D
deanna66Jul 31, 2025
Why Fountainhead Paint Sprayer leaks at pump or does not build pressure?
- Z
  zgibsonJul 31, 2025
  If your Fountainhead Paint Sprayer leaks at the pump or doesn't build pressure, it could be due to several reasons: 1. Dirt or debris on the pump gasket or closure. Clean the gasket or closure to resolve this. 2. A chipped, torn, swollen, or defective pump gasket. Replace the old gasket with a new one. 3. A faulty check valve at the bottom of the pump assembly. Replace if missing or damaged. 4. A worn or damaged o-ring on the piston. Replace the o-ring if it's worn or damaged.
B
Bianca MendozaAug 4, 2025
What to do if Fountainhead Paint Sprayer hose leaks at tank or shut-off?
- E
  Eric MartinAug 4, 2025
  If the hose on your Fountainhead Paint Sprayer leaks at the tank or shut-off, it could be due to: 1. A loose hose. Tighten the hose nut. 2. A cracked, swollen, or faulty hose. Replace the shut-off assembly.
S
Sarah NewtonAug 9, 2025
Why Fountainhead Paint Sprayer material overflows through pump barrel?
- J
  jessica72Aug 9, 2025
  If sprayer material overflows through the pump barrel, or the pump handle rises when unlocked on your Fountainhead Paint Sprayer, the causes and solutions are: 1. Dirt or debris under the check valve on the pump. Clean the check valve and the valve sealing surface on the pump. 2. A chipped, torn, or swollen pump check valve. Replace the check valve.
F
fphillipsAug 13, 2025
How to fix Fountainhead Paint Sprayer nozzle drips when shut-off lever is released?
- A
  Anne LeeAug 13, 2025
  If the nozzle of your Fountainhead Paint Sprayer drips when the shut-off lever is released, it could be due to: 1. Dirt or debris in the shut-off valve. Clean the shut-off. 2. A damaged o-ring or seal in the shut-off. Service the shut-off seals.
B
Brenda EdwardsAug 17, 2025
Why Fountainhead Paint Sprayer is difficult to pump?
- A
  Amanda HardingAug 17, 2025
  If your Fountainhead Paint Sprayer is difficult to pump, it could be due to: 1. A damaged piston o-ring. Replace the piston o-ring. 2. A dry piston o-ring. Lubricate the piston o-ring.
P
Patrick JohnsonAug 21, 2025
How to stop Fountainhead Paint Sprayer spraying when pumping?
- T
  Tanya McmahonAug 21, 2025
  If your Fountainhead Paint Sprayer starts to spray when pumping or won't stop spraying when the shut-off lever is released, it's likely because the shut-off lock is engaged. To resolve this, squeeze the shut-off lever and rotate the lock towards the nozzle.
C
Chelsea DavisAug 26, 2025
What to do if Fountainhead Paint Sprayer tank leaks?
- S
  Stephen EdwardsAug 26, 2025
  If there is evidence of spray material escaping from the tank of your Fountainhead Paint Sprayer, replace the entire sprayer.