EasyManua.ls Logo

Founter MA20 - Cleaning and Maintenance

Founter MA20
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
machine will automatically shut down, to show that the amount of goods have been
over the design requirements of the machine itself. One needs to reduce the amount of
items to no more than the designed requirements of the machine. And then press the
back of the 14. Overheat Protector off to have normal operation.
9, Timing: For convenience, our machine is equipped with timing devices, and the
regular time is 0-30 minutes. Users simply by turning 22. Timer to set the time. And
then press 23. Start Switch to start. And the machine will automatically stop
working when time is up. If you do not want that function, 22. Timer can be marked
to hold position on 17. Control Panel.
10, If the power cord is damaged, you must go to a professional maintenance
company to replace.
11, We have described the choice of stirrer and stirring speed in detail
in section XI, please read carefully.
.
IX Cleaning
Regular cleaning is necessary for the remaing food in the mixer is easy
to produce bacterium
1, For safety’s sake, please pull out the plug first while in the cleaning.
2, Use a soft towel or sponge and dip it in warm water at the very beginning.
(mild detergent can be added)
Prohibition Mark
Do not use a hard brush or wire brush and do not use scouring powder,
gasoline, bananas water, acetone and other organic solvents, hot
water or acid and alkali to clean the mixer.
3 Wipe with a dry cloth if the mixer is wet.
Warning Mark
Do not clean with the water spray rinse, so as not to affect the electrical
insulation properties.
Clean the "switch" and "power line" and other electrical items with a dry
cloth.
X. Transport and Storage of the Mixer