1. The MA20 mixers manufactured by our company are in the boxes with the bolt. Do
not upsides down during transportation,any horizontal placement, extrusion, collision,
rain or vibration should be avoid. Blender process of handling can be no more than
angle 45 °.
2 Products should be stored in ventilated and dry warehouse, With the toxic, corrosive
materials separated.
3 Be aware of the storage and transportation signs while you’re storingthe mixers.
XI, MA20 Standard Accessories and Their Functions
1 Standard Annex
The company prepared for you three different stirrers (plate-shaped blender, mixer
and hook-shaped ball blender.) You’ll get the best mixing results if your apply to all
types of mixers correctly.
Shape mixer Ball mixer Hook-shaped stirrer
2, Cleaning for the Mixers and the Mixing Buckets
Before your first use of the mixer,have a thorough clean of the mixers and the mixing
buckets.
Please place the stirrer in hot water and gentle cleaning agents for cleaning, then use a
soft soda solution or acetic acid solution, rinse them. Finally, rinse thoroughly in these
parts washing.
To Next Page
Loading...