VI．Safety Precautions
The set of mixers relate to 220v50hz power.
(see the power signed on the parameters) If
the power supply a larger range, it may result
in mixers can’t start or burn the motor. In that
case, more than 1.1kw must be installed with
the automatic voltage regulator
Users should havea separate
dedicated outlet. Our mixers offer
three-wire power cord (grounded)
plug to match
the standard three-wire (grounded)
outlet. Do not cut or remove the
power cord plug at the foot of the
third (ground) in any case.The plug
is able to touch the ground when the
mixer is in place, to facilitate the
plug, Warning! Power cord should
remain firmly with the socket
contact, otherwise may cause fire
1.Don’t pull the power plug out of the
mixer. We should firmly grasp the plug, and
pull directly from the socket.
2 Do not stamp on the cord.
3 While moving the mixer, please be careful
not to damage the power cord.
Don’t use the mixer once the power
cord or plug broken. You may refer
to a professional maintenance
company for help.
When gas and other flammable gases were
leaking
1. Turn off the valve.
2 Open the doors and windows.
3 Do not pull or insert fittings or appliances.
Following please disconnect the
power plug
1 Before cleaning and maintenance,
To Next Page
Loading...