Need help?Do you have a question about the Four winns HORIZON and is the answer not in the manual?
Identifies labels indicating extremely hazardous situations that could cause death or serious injury.
Warns about potential hazards related to boarding ladders, especially when the engine is running.
Refers to essential equipment and procedures for safe operation.
Provides information on maximum persons and weight capacity for the boat.
Details warnings related to powered ventilation for gasoline engines.
Warns about the dangers of using the boat for ski towing.
Alerts to the fire and explosion hazard of leaking fuel.
Warns about hazards associated with inadequate ventilation.
Highlights the dangers of carbon monoxide from exhaust fumes.
Warns about CO accumulation with canvas coverings.
Alerts to potential hazards related to transom or side doors.
Information on engine exhaust hazards, symptoms of CO poisoning, and precautions.
Explains propeller terminology, size, and performance factors.
Discusses hull planing angles and the use of power trim/tilt for optimal performance.
Describes the various gauges and indicators on the boat's instrument panel.
Explains the tachometer's function in measuring engine RPM.
Describes the electronic speedometer and its paddle wheel sender.
Explains the engine cooling system temperature gauge.
Details the oil pressure gauge and its importance for engine health.
Explains the voltmeter's role in monitoring battery condition and alternator output.
Describes the fuel gauge and its limitations as a non-precision instrument.
Explains the visual indication of the outdrive's trim angle.
Covers the operation and display settings of the VDO instrument module.
Details the function, operation, and safety of the emergency stop switch.
Details how to operate the throttle and shift controls.
Specific operation instructions for carbureted engines.
Specific operation instructions for Fuel Injected (EFI) engines.
Explains the function of the neutral safety switch for starting the engine.
Guidelines for maintaining control cables and linkages.
Describes the rotary steering system's components and operation.
Explains the tilt steering mechanism for adjusting steering wheel position.
Details the power steering system and its benefits.
Procedures for maintaining the steering system.
Covers battery system setup and maintenance.
Describes various 12-volt electrical equipment and their installation.
Details electrical equipment located at the helm station.
Procedures for maintaining the electrical system.
Methods for maintaining electrical wiring integrity.
Explains stray current corrosion and prevention methods.
Covers design, testing, and components of gasoline fuel systems.
Details the fuel gauge and its limitations.
Safety procedures and guidelines for fueling the boat.
Explains the engine compartment ventilation system design and maintenance.
Information on hull drainage systems, including transom drain and bilge pumps.
Covers the function and operation of bilge pumps.
Covers periodic maintenance to preserve gel coat appearance and shine.
Procedures for repairing common fiberglass damage like scratches and cracks.
Detailed steps for preparing the boat for winter storage.
Instructions for flushing the engine to remove salt and mud.
A schedule outlining maintenance tasks based on time or usage.
Procedures for operating and towing the trailer.
Steps for properly hitching the trailer to the tow vehicle.
Specific instructions for backing up with surge disc brakes.
Procedures for inspecting and repairing trailer axles.
Identifies labels indicating extremely hazardous situations that could cause death or serious injury.
Warns about potential hazards related to boarding ladders, especially when the engine is running.
Refers to essential equipment and procedures for safe operation.
Provides information on maximum persons and weight capacity for the boat.
Details warnings related to powered ventilation for gasoline engines.
Warns about the dangers of using the boat for ski towing.
Alerts to the fire and explosion hazard of leaking fuel.
Warns about hazards associated with inadequate ventilation.
Highlights the dangers of carbon monoxide from exhaust fumes.
Warns about CO accumulation with canvas coverings.
Alerts to potential hazards related to transom or side doors.
Information on engine exhaust hazards, symptoms of CO poisoning, and precautions.
Explains propeller terminology, size, and performance factors.
Discusses hull planing angles and the use of power trim/tilt for optimal performance.
Describes the various gauges and indicators on the boat's instrument panel.
Explains the tachometer's function in measuring engine RPM.
Describes the electronic speedometer and its paddle wheel sender.
Explains the engine cooling system temperature gauge.
Details the oil pressure gauge and its importance for engine health.
Explains the voltmeter's role in monitoring battery condition and alternator output.
Describes the fuel gauge and its limitations as a non-precision instrument.
Explains the visual indication of the outdrive's trim angle.
Covers the operation and display settings of the VDO instrument module.
Details the function, operation, and safety of the emergency stop switch.
Details how to operate the throttle and shift controls.
Specific operation instructions for carbureted engines.
Specific operation instructions for Fuel Injected (EFI) engines.
Explains the function of the neutral safety switch for starting the engine.
Guidelines for maintaining control cables and linkages.
Describes the rotary steering system's components and operation.
Explains the tilt steering mechanism for adjusting steering wheel position.
Details the power steering system and its benefits.
Procedures for maintaining the steering system.
Covers battery system setup and maintenance.
Describes various 12-volt electrical equipment and their installation.
Details electrical equipment located at the helm station.
Procedures for maintaining the electrical system.
Methods for maintaining electrical wiring integrity.
Explains stray current corrosion and prevention methods.
Covers design, testing, and components of gasoline fuel systems.
Details the fuel gauge and its limitations.
Safety procedures and guidelines for fueling the boat.
Explains the engine compartment ventilation system design and maintenance.
Information on hull drainage systems, including transom drain and bilge pumps.
Covers the function and operation of bilge pumps.
Covers periodic maintenance to preserve gel coat appearance and shine.
Procedures for repairing common fiberglass damage like scratches and cracks.
Detailed steps for preparing the boat for winter storage.
Instructions for flushing the engine to remove salt and mud.
A schedule outlining maintenance tasks based on time or usage.
Procedures for operating and towing the trailer.
Steps for properly hitching the trailer to the tow vehicle.
Specific instructions for backing up with surge disc brakes.
Procedures for inspecting and repairing trailer axles.
General| Category | Bowrider |
|---|---|
| Manufacturer | Four Winns |
| Model | HORIZON |
| Beam | Varies by model |
| Dry Weight | Varies by model |
| Fuel Capacity | Varies by model |
| Max Horsepower | Varies by model |
| Passenger Capacity | Varies by model |
| Length Overall | Varies by model |
To Next Page