FourStar 11224668 User Manual

MODEL: 11224668
“A” FRAME DESK
ASSEMBLY INSTRUCTIONS
PARTS AND HARDWARE LIST
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING
AND ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT
DAMAGE TO THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
RUBBER MALLET
Do you have any questions? Missing small parts or hardware? If you need
assistance with the assembly of your
“A” FRAME DESK
please e-mail our Customer Service Department at:
support@fourstari.com or
call us at (800) 639-3803 or (508) 473-7688
if calling locally
from Massachusetts area
Please include the following information in your email:
• Where item was purchased • Item, model, style or SKU number listed on
instructions or box • Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
NO HARDWARE LIST QTY
4 PCS
2 PCS
2 PCS
10 PCS
8 PCS
2 PCS
4 PCS
6 PCS
LONG SQUARE TUBE
PE SQUARE LEG
PE INSERT CAP
M4 x 45MM C/B
SCREW(BLACK)
M5 x 25MM
WOODEN DOWEL
45MM BRACKET
#8 x l” CSK SCREW
PE SCREW CAP
COVER (BLACK)
1
2
3
4
5
6
7
8
A
1
1
1
B
C
D
E
G
NO PARTS LIST QTY
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
TOP PANEL
LEFT SIDE PANEL
RICHT SIDE PANEL
CENTER PANEL
BOTTOM PANEL
APRON PANEL
BACK PANEL
A
B
C
D
E
F
G
STEP 1
STEP 1-1
INSERT BRACKET (6) INTO PANEL (F) BY USING RUBBER
MALLET.
STEP 1-2
INSERT WOODEN DOWEL (5) INTO PANEL (B) (C).
STEP 5
ATTACH PANEL (E), SQUARE LEG (2) AND PANEL (G) TO ASSEMBLED PART
AND SECURE BY USING SCREW (4).
STEP 6
ATTACH PANEL (B) TO ASSEMBLED PART AND SECURE BY USING SCREW (4).
STEP 7
STEP 7-1
SECURE PANEL (F) TO PANEL (E) BY ATTACHING SCREW (7) TO BRACKET
ON PANEL (F).
STEP 7-2
COVER SCREW HOLES BY SCREW CAP COVER (8).
STEP 2
INSTALL INSERT CAP (3) INTO PANEL (A) BY USING
RUBBER MALLET.
STEP 3
ATTACH LONG SQUARE TUBE (1) TO PANEL (A) AND
TIGHTEN IT.
STEP 4
STEP 4-1
ATTACH LONG SQUARE TUBE (1) AND PANEL (D) TO
ASSEMBLED PART.
STEP 4-2
ATTACH PANEL (C) TO PANEL(D) AND ATTACH PANEL (F)
TO PANEL (C) BY USING SCREW (4).
B
C
5
6
F
A
3
A
1
A
1
D
F
4
C
2
G
A
D
E
4
G
4
B
D
A
E
C
D
A
E
8
6
7

FourStar 11224668 Specifications

General

Brand	FourStar
Model	11224668
Category	Indoor Furnishing
Language	English

Summary

Frame Desk Assembly Guidance and Safety

Pre-Assembly Instructions

Read instructions carefully, ensure adult supervision, and check all parts before starting assembly.

Parts and Hardware Identification

Frame Desk Assembly Steps

Initial Panel Setup

Insert brackets and dowels into panels, and install insert caps into the top panel as per steps 1 and 2.

Frame Construction

Attach square tubes and side panels to the top panel and center panel using screws.

Final Assembly

Secure the apron panel, attach the bottom panel, and cover screw holes with cap covers.