Fowler 54-100-000-1 User Manual

IMPORTANT!
Initial Operation
This electronic caliper comes supplied with a
battery and is instantly operational. However,
we suggest you read this manual prior to using
your instrument.
Internal Jaws
Locking Screw
Display
External Jaws
Function Buttons
Battery Cover Beam Depth Measurement RodThumbroll
On/Zero
:
Press <on> function button. Press
button an additional time to zero. Caliper fea
-
tures auto-off function.
Zero Setting:
Press <zero> function button.
Change Measuring Standard:
Press
<inch/mm> function button.
Absolute/Incremental
: Press <abs> button, to
return to zero function press button again.
RS232 data output
: By connection cable (not
included).The
54-100-004-1 does not have
RS232 capab
ilities.
Once Display begins flashing:
• Slide battery cover to open, then remove
the battery by gently tapping the instrument
in your hand. (Never try to force or pry the
battery out). Insert the new battery with the
positive pole “+” facing upwards and replace
the cover.
• Please dispose of used batteries at a proper
collection center.
Clean the caliper with a soft cloth. You may
sparingly use some isopropyl alcohol. DO
NOT use any other type of solvent. DO NOT
immerse the caliper in any type of liquid.
Functions
Battery Replacement Cleaning
New_instr_54-100_series.indd 1 12/2/05 11:15:07 AM

Fowler 54-100-000-1 Specifications

General

Brand	Fowler
Model	54-100-000-1
Category	Measuring Instruments
Language	English

Summary

Initial Operation

Functions

On/Zero Function

Press <on> button to turn on. Press again to zero. Features auto-off.

Zero Setting

Press <zero> function button to set the zero point.

Change Measuring Standard

Press <inch/mm> function button to switch between units.

Absolute/Incremental Mode

Press <abs> button to switch modes. Press again to return to zero.

RS232 Data Output

Via connection cable (not included). Specific models lack RS232 capabilities.

Battery Replacement

Display Flashing Indicator

When display flashes, slide cover open, tap gently to remove battery. Insert new battery positive pole up.

Cleaning

Guarantee

Declaration of Conformity

Reset Procedure

Precautions

Technical Data

Measuring Range

Specifies the minimum and maximum measurement limits for different models.

Resolution

Indicates the smallest increment the caliper can measure.

Maximum Deviation

Defines the acceptable error margin for measurements.

Repeatability

Specifies the consistency of measurements when repeated under same conditions.

Measuring System

Identifies the technology used for measurement (e.g., Capacitive).

Display

Details the type and size of the measurement display.

Maximum Measuring Speed

Indicates the fastest rate at which measurements can be taken.

Battery Specifications

Details the battery type, voltage, capacity, and expected life.

Degree of Protection

Specifies the ingress protection rating (e.g., IP40).

Operational Temperature Range

Defines the ambient temperature range for proper instrument operation.

Maximum Relative Humidity

Specifies the maximum humidity level for operation.