The drill press does not start:
- The electric current is missing in the socket to which the supply cable is connected.
- The supply cable is faulty
- The engine is damaged
- The cover of pulleys’ box is not closed
The tools wear rapidly:
- The tool is not correctly sharpened
- The tool is not suitable for the material to be cut, or the lubricant oil is missing during
metal cutting,
- Too high advance
The engine does not work properly:
- The engine may be damaged: get the machine checked by an electrician
The axle goes up and down with difficulty:
- Clean and grease the axle of the spindle under the pulley.
To Next Page
Loading...
Need help?
General
