Fox F50-842 - Page 13

11
EN
Fig. 8
5. Secure the motor/drum assembly, the bag hook and the stanchions using the relative screws, nuts and washers (Fig.
6).
6. Pass the closing strap through the dust upper bag’s
mouth that has a device for fi xing it to the hook. Hang
the bag on the hook. Place the open end of the fi lter
bag on the drum’s edge. Once done, adjust the closing
strap so that the tensioner is in the closing system’s
teeth. Press the tensioner’s handle to lock the bag in
place. Make sure the closing strap is in the manifold’s
throat before locking the tensioner.
Position the lower bag like the upper bag but from the
manifold’s lower part without suspending it (Fig. 7).
Fig. 6
Fig. 8
7. Fixe the pipe to the outlet unions, as indicated in Fig.
8.
Fig. 7
F50-842_ISTRUZIONI.indd Sez1:11F50-842_ISTRUZIONI.indd Sez1:11 17/05/2016 14.53.1717/05/2016 14.53.17