Need help?Do you have a question about the Foxconn nT-i1500 and is the answer not in the manual?
General| Processor | Intel Atom D525 |
|---|---|
| Processor Speed | 1.8 GHz |
| Chipset | Intel NM10 |
| Memory Type | DDR3 |
| Ports | HDMI |
| Memory Capacity | 2 GB |
| LAN | 10/100 Mbps Ethernet |
| WLAN | 802.11 b/g/n |
| Card Reader | 4-in-1 card reader |
| Front I/O Ports | USB 2.0, Audio |
| Rear I/O Ports | VGA, HDMI, Ethernet, USB 2.0 |
| Power Supply | 65W Adapter |
| USB Ports | 4 x USB 2.0 |
| Network | 10/100 Mbps Ethernet |
Describes the top view of the NETTOP, including the Kensington lock.
Details the ports and buttons on the front of the NETTOP device.
Explains the ports and connectors on the back of the NETTOP.
Describes the bottom view and placement of feet for the NETTOP.
Covers installing the NETTOP on a desk or mounting it on a display.
Guides on connecting the monitor, USB devices, network cable, and power cord.
Instructions on how to access the BIOS setup utility using the DEL key.
Overview of the Main BIOS screen displaying system information.
Details on configuring advanced system features in the BIOS.
Configuration options for ACPI suspend modes and deep sleep.
Options for setting administrator, user, and supervisor passwords.
How to set boot priority and configure quiet boot options.
Instructions for saving changes, discarding changes, and exiting BIOS.
Step-by-step guide to installing the Windows 7 operating system.
Instructions for installing essential drivers after Windows 7 installation.
Guide to using the FOX WinFlash utility for BIOS backup and update.
To Next Page
