Need help?Do you have a question about the Foxsur FBC122412D and is the answer not in the manual?
Displays the internal temperature of the charger unit.
Shows the current voltage being supplied to the battery.
Indicates the current flow rate into the battery.
Indicates when the charger is operating in repair or desulphation mode.
Shows that the charger is in standby mode, not actively charging.
Signals that the battery has reached its full charge capacity.
Indicates that the desulphation charging mode is active.
Shows that the charger is performing an automatic battery test.
Alerts when the battery voltage is too low to save or charge.
Adjusts charge voltage for cold temperatures (below +10°C) for car batteries.
Reduces charge voltage for hot temperatures (above +28°C) for car batteries.
Details the seven distinct stages of the automatic charging cycle.
Describes the purpose and usage of various charging modes for different battery types.
Step-by-step instructions on how to connect and start the charging process.
General| Charging Technology | Smart Charging |
|---|---|
| Thermal Protection | Yes |
| Short Circuit Protection | Yes |
| Reverse Polarity Protection | Yes |
| Overcharge Protection | Yes |
| Charging Ports | 1 |
| Input Voltage | AC 100-240V |
| Output Voltage | 12V |
| Battery Type | Lead-acid |
| Compatibility | 12V Batteries |
| Protection Features | Overcharge |
To Next Page
