English 5
CHARGER MODES:
The Charger has seven (7) modes: 12V AGM+(LiFePo4), 24V AGM+(LiFePo4),
12V Car, 24V Car, 12V Motorcycle, 24V Motorcycle, REPAIR.
It is important to understand the differences and purpose of each charge mode.
Do not operate the charger until you confirm the appropriate charge mode for
your battery. Below is a brief description:
AGM or LiFePO4 Batteries Mode
For AGM or LiFePO4 Batteries
CAR Batteries Mode
For GEL, SLA, WET, DEEP CYCLE, EFB,
Calcium Batteries
Motorcycle Batteries Mode
For Motorcycle Batteries
Repair Mode (16 hours)
An advanced battery recovery mode
for repairing and storing, old, idle,
damaged, stratified or sulfated.
Not all batteries can be recovered, only
can use on Motorcycle and Car batteries
Charge mode select button
BEGIN CHARGING:
1.) Verify the voltage and chemistry of the battery.
2.) Confirm that you have connected the AC power plug is plugged into an
electrical outlet.
3.) Press the mode button to toggle to the appropriate charge mode.
4.) Confirm that you have connected the battery clamps or eyelet terminal
connectors properly
5.) The mode LED will illuminate the selected charge mode and the Charge
Icon will illuminate (depending on the health of the battery) indicating the
charging process has started.
6.) The charger can now be left connected to the battery at all times to provide
maintenance charging.
To Next Page
Loading...
