4) Function of continuous switching:
4.1) Operate 1 time continuously and quickly, from position 2 - 3 - 2,
to Home position.
4.2) Operate 2 times continuously and quickly, from position 2 - 3 - 2
- 3 - 2, the camera lens looks vertically down.
4.3) Operate 3 times continuously and quickly, from position 2
- 3 - 2
- 3 - 2 - 3 - 2, to disable Follow Yaw Mode (gimbal yaw not follows by
frame)
4.4) OOperate 4 times continuously and quickly, from position 2 - 3 -
2 - 3 - 2 - 3 - 2 - 3 - 2, to enable Follow Yaw Mode (gimbal yaw follows
by frame)
Low Gear
Position 1
Middle Gear
Position 2
High Gear
Position 3
Position 1: Low speed mode, control pitch / yaw with this mode at
lowest speed
Position 2: Middle speed mode, control pitch / yaw with this mode at
middle speed
Position 3: High speed mode, control pitch / yaw with this mode at
highest speed
(If it is controlled by rotary knob, the speed will change according to
switch position)
EH10 10X Optical Zoom Camera User Manual
@2022 FOXTECH All Rights Reserved 14
EH10 10X Optical Zoom Camera
To Next Page
Loading...
