Foxwell BT100 User Manual

BT100 12 Volt Automotive Battery Analyzer User’s Guide - English Version_V1.1
1
Trademarks
FOXWELL is trademark of Shenzhen Foxwell Technology Co., Ltd.
All other marks are trademarks or registered trademarks of their respective holders.
Copyright Information
©2015 Shenzhen Foxwell Technology Co., Ltd. All rights reserved.
Disclaimer
The information, specifications and illustrations in this manual are based on the latest information
available at the time of printing.
Foxwell reserves the right to make changes at any time without notice.
Visit our website at:
www.foxwelltech.com
For Technical Assistance, send us email at
support@foxwelltech.com

Foxwell BT100 Specifications

General

Test Range (CCA)	100-2000 CCA
Operating Temperature	-20°C to 60°C
Display	LCD
Compatibility	12V batteries
Battery Types	AGM, GEL
Supported Standards	IEC, SAE, EN, DIN, JIS
Battery Type	AGM, GEL
Storage Temperature	-20°C to 70°C
Dimensions	180mm x 90mm x 40mm

Summary

One-Year Limited Warranty

Warranty Terms and Conditions

Details warranty coverage, exclusions, customer responsibilities, and repair processes.

Warranty Limitations and Disclaimers

Safety Information

Safety Message Conventions

Explains hazard signal words (DANGER, WARNING, CAUTION) and their meanings.

Important Safety Instructions

Provides critical safety advice, including handling lead and compound warnings.

Using This Manual

Manual Conventions and Guidance

Explains formatting elements like bold text, symbols, notes, and important messages.

Product Introduction

Tester Description

Details the BT100 analyzer's functions and intended use for battery testing.

Accessory Descriptions

Specifications

Operations

Connecting the Tester

Step-by-step guide on how to properly connect the tester to a vehicle battery.

Battery Test Procedure

Details the steps for performing a battery test, including location and type selection.

Language Settings