NT650Elite Multi-Application Service Tool Manual_English_V1.01
Figure 5-24 Sample Function Menu Screen
2. A group selection screen, test selection screen, several step-by-step instruction screens, or bi-
directional control screen may appear. Read the screens and follow all instructions.If necessary,
use the function keys to perform commands or answer any questions. If more than 3 function
keys displays, use up and down arrow keys to select a command and press the ENTER key to
confirm.
Figure 5-25 Sample Special Function screen
3. When completed, press the BACK key to return to previous screens.
NOTE
Not all function options listed above are applicable to all vehicles. Available options may vary by the
year, model, and make of the test vehicle.
6 Maintenance
This section gives brief instructions of the most commonly required service and maintenance
operations. Typical service operation screens are a series of menu driven executive commands.
Follow on-screen instructions to complete the operation.
Available service and maintenance options include:
● Oil Light Reset
● EPB Service
●
Battery Configuration
● DPF Regeneration
● TPS/TBA
●
SAS Calibration
● CVT
● Gear Learn
●
TPMS Programming Service
● Odometer
● Injector coding
To start a test:
1. Scroll with the arrow keys to highlight Maintenance from the main menu and press the ENTER key.
A list of available services display.
To Next Page
Loading...
