24
NT710 User's Manual V1.1
Figure 5-1 Sample Automatic Update Screen
To automatic update or refer to 12.7 Automatic Update:
1. Press Settings from home screen of the NT710 diagnostic application.
2. Select Automatic Update, then set automatic update notice enable.
5.2 Manual Update
To update the diagnostic application:
1. Press Update of NT710 diagnostic application, and the update client
starts up automatically.
2. The available updates display. Click the check box(s) in front of the
software you wish to update and then click the Update button to
download.
3. When all the items are updated, an “Update Done” message displays.
NOTE
Please make sure your network works correctly and the tablet is fully charged
or connect to external power supply.
Figure 5-2 Sample Update Screen
To Next Page
Loading...
