TPMS Sensor Activation
12-volt wall plug USB connection to personal computer
The scanner has a built-in lithium-ion polymer rechargeable battery.
The unit charges on any of the following sources:
Battery Charging
Press Activate to test the TPMS. If test
passes,TPMS data will be briefly
displayed for 3 seconds.
Highlight TPMS from the main menu and
select the vehicle model as need.
Select Trigger from the available menu.
Place the tool to the correct position to
ensure sensor activation and decode.
3s...
Correct position
For TPMS Service Tool T1000
T1000XXXXX
2
To Next Page
