For TPMS Service Tool T1000
s
Connect the scanner to the computer with the TF
card reader or USB cable provided (TF card reader
update is suggested).
TPMS Sensor Programming
Highlight TPMS from the
main menu and select the
vehicle model as need.
Select Programming--
Automatic Create from
the available menu.
Place new Foxwell
sensors(1-16) near the
TPMS tool (around 0-20 cm).
Press Y to start the
programming when the tool
detect the sensor.
Automatic Create (1-16 sensors)
Highlight TPMS from the
main menu and select the
vehicle model as need.
Select Programming--
Clone by Activation from
the available menu.
Place the tool near the
original sensor to be copied
and press Activate to
continue.
After trigger successfully,
press Y to continue.
Press Y to start the
programming when the tool
detect the sensor.
Clone by Activation
Place a new Foxwell
sensor near the TPMS tool
(around 0-20 cm).
Before updating, please ensure you are connected to the Internet and you have created a Foxwell ID.
Highlight TPMS from the
main menu and select the
vehicle model as need.
Select Programming--
Manual Create from the
available menu.
Press Y to start the program-
ming when the tool detect the
sensor.
Input the sensor ID in the
dialog box and press Y to
continue.
012345678
Place a new Foxwell sensor
near the TPMS tool (around
0-20 cm).
Manual Create
To Previous Page
Loading...