1
ENGLISH
N SERIES
MECHANICAL INJECTION
SYSTEM
N45 MNA - N45 MSA
N45 MNS - N45 MSS
N45 MNT - N45 MST
N67 MNA - N67 MSA
N67 MNT - N67 MST
N45 AM1A/AM1
N45 SM1A/SM1/SM2A/SM2
N45 TM1A/TM1/TM2A/TM2/TM2X
N67 SM1
N67 TM2A/TM2/TM3A/TM3/TM1X
USE AND MAINTENANCE
INTRODUCTION
We would like to thank you for buying an FPT product, and
compliment you on your choice of engine.
Before you carry out any operation involving the engine or its fittings,
please read the contents of this manual carefully; compliance with the
instructions provided in the manual is the best way to guarantee
trouble-free, long term operation of the engine.
The contents of this manual refer to the standard configuration of the
engine, and the illustrations are purely indicative. Some instructions are
provided by giving the sequence of operations to be carried out in
order to allow the engine and/or its fittings to perform in a certain way.
In some cases they will be dependent on the configuration of the
commands and the set-up of the machine on which the engine is
installed; for any points that differ from the contents of this manual,
please consult the instructions provided by the machine Manufacturer
or a specific manual.
The information provided below was current at the date of
publication.
The Manufacturer reserves the right to make modifications at any time
without prior notice, for technical or commercial reasons or to update
the engines to comply with legal requirements in the various
Countries.
The Manufacturer declines all liability for any errors or omissions.
Please remember that the FPT Technical Service Network is available
to offer you its experience and professional skills, wherever you may
be.
To Next Page
Loading...
Need help?
General
