1. Turn on/off
When the machine is powered on, press key to start normal operation of the machine, and then
press key to stop operation of the machine. When the machine is working, long press
button for 3 seconds, the child lock function will be activated, and the corresponding indicator light will
be on. At this point, all key operations are invalid. Press button for another 3 seconds, and the
corresponding indicator light of the child lock function will be turned off.
2. Humidity setting
When the machine is in operation, adjust the humidity from 40% to 80% by and , and
adjust the humidity by 5% each time. The LED flashes when the machine is adjusted. Stop pressing for 5
seconds and return to normal display. The default value for humidity is 40%.
3. Fan-speed setting
Press to set the fan speed to high or low, and the corresponding fan speed light will be lighted.
4. Work pattern setting
When you press the key, you can switch between dehumidification mode and dry clothing mode,
and the corresponding indicator light is on. In dehumidification mode, when the environment is the same
as the set humidity, the machine stops dehumidification. In the dry clothing mode, the wind speed is
automatic, and the wind speed is high when the ring humidity is higher than 55%. Ambient humidity
below 50% is low wind. Humidity cannot be set, set 20% humidity to work dehumidification.
5. Time-setting
After the machine stops, press the button to enter the startup time setting state, and the LED will
display the startup time. Press and to adjust the automatic startup time from 1 hour to
24 hours.
When the machine is running, press the button to enter the setting state of shutdown time, and the LED
will display the shutdown time. Press and to adjust the automatic shutdown time from 1
hour to 24 hours.
The switch will disable the timing function, but it will not disable the timing function when the water is full.
To Next Page
Loading...
