EasyManua.ls Logo

Francis Francis illy Y5 Milk User Manual

Francis Francis illy Y5 Milk
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Francis Francis for illy Y5 Milk, Espresso and Coee Machine
QUICK START GUIDE
PREPARE MACHINE FOR USE
Step 1 Pre-wash water and milk tanks with soap and hot water, then rinse and dry.
Step 2 Fill water tank to max line (33 oz.).
Step 3 Push water tank into machine completely.
Step 4 Turn machine power switch on. Wait until LED cup icons no longer flash on top of machine. Machine will be ready in less
than one minute.
Step 5 Place a large mug on tray and press the water icon , without any capsules in the machine. Repeat this process until water
tank is empty, then refill to max line. Filtered water is recommended.
Step 6 Repeat step 5 by, placing a mug on the tray and filling the milk tank with water and pressing the milk icon to flush all
the water out of milk tank. This will pre-clean the milk function prior to preparing beverages.
BREW COFFEE OR ESPRESSO
Step 1 Place an iperEspresso espresso or coee capsule into the capsule holder by lifting the lever.
Step 2 Close the lever by pushing down completely, until tightly closed.
Step 3 Place your cup or mug in the appropriate tray.
Step 4 Select your beverage by touching the small cup (for ESPRESSO) or Mug (for COFFEE) icon. Serve immediately.
Machine is pre-set to automatically shut o after approximately 18 seconds. If you want to change this automatic setting, consult your user’s manual.
espresso capsules coee capsules
PREPARE MILK DRINKS
Ensure milk kit components are
properly assembled. Refer to
instruction manual and video link:
illy.com/Y5milkoperatingtips
Insert milk kit (dispensing spout)
firmly into the hole on left side
of the machine.
Fill the milk tank to the max line
(16.9 oz.) with cold milk.
Make sure milk tube is pushed through
the opening by aligning the rubber tube’s
tab flush to the inside of the milk lid (see
step 3 on reverse side). Check milk tube
“mouth” is protruding on outside of lid.
Place lid on top of the milk tank.
2 3 4
Attach milk tank to machine by
pushing the exposed tube into
the black spout on machine to
firmly attach.
5
Place an iperEspresso capsule
into the capsule holder by lifting
the lever. Close the lever by
pushing down completely,
until tightly closed. Place your
cup in the appropriate tray.
6 7
You can easily prepare milk
based beverages by selecting
cappuccino, latte
macchiato, or steamed milk.
1
Question and Answer IconNeed help?

Do you have a question about the Francis Francis illy Y5 Milk and is the answer not in the manual?

Francis Francis illy Y5 Milk Specifications

General IconGeneral
BrandFrancis Francis
Modelilly Y5 Milk
CategoryCoffee Maker
LanguageEnglish

Summary

Prepare Machine for Use

Initial Water Tank Preparation and Flushing

Pre-wash, fill, and flush the water tank to prepare the machine for initial use.

Milk Tank Pre-cleaning

Flush the milk tank with water to pre-clean the milk function before preparing beverages.

Brew Coffee or Espresso

Brewing Process Steps

Insert capsule, close lever, place cup, select beverage, and serve immediately.

Prepare Milk Drinks

Assemble and Connect Milk Kit Components

Assemble the milk kit, insert the dispensing spout, and attach the milk tank to the machine.

Fill and Prepare Milk Tank and Tube

Fill the milk tank with cold milk and ensure the milk tube is correctly aligned and protruding.

Select Milk Beverage Type

Choose from options like cappuccino, latte macchiato, or steamed milk for your drink.

Y5 Milk Cleaning and Maintenance

Cleaning Milk Tank, Tube, and Spout

Wash milk tank lid, tube, upper pipe, and dispensing spout with hot water.

Cleaning Upper Tube Micro-hole

Ensure the micro-hole in the upper tube is not clogged for correct milk frothing.

Rinsing and Reassembly of Milk Kit

Dry components, rinse the milk tank, and reassemble the milk kit correctly.

Troubleshooting Common Issues

No Frothed Milk

Check milk type, tube position, component cleanliness, milk level, and upper tube for clogs.

No Coffee or Espresso Brewed

Verify water tank insertion, descale for lime scale, and ensure pump is functioning.

Water Leaks

Confirm water tank and milk kit components are correctly inserted and assembled.

Cleaning Procedures and Frequency

Suggests soaking components in hot water or with cleaning agent; recommends daily cleaning.

Related product manuals