To Next Page
L
Linda ZimmermanAug 4, 2025
What to do if water comes out of FrancisFrancis Coffee Maker?
- GGerald JohnsonAug 4, 2025
If water is leaking from your FrancisFrancis Coffee Maker, immediately switch off and unplug the machine.
What to do if water comes out of FrancisFrancis Coffee Maker?
If water is leaking from your FrancisFrancis Coffee Maker, immediately switch off and unplug the machine.
How to fix blinking brewing light on FrancisFrancis X2.1 IPERESPRESSO?
If the brewing light on your FrancisFrancis Coffee Maker is blinking rapidly, try the following steps: First, switch off the machine. Then, refill the water tank if needed. Switch the machine back on and wait for the blue light to turn on. If the light continues to blink quickly, repeat these steps twice. You can still use the brewing and steam functions.
What to do if steam light blinks quickly on FrancisFrancis Coffee Maker?
If the steam light is blinking rapidly on your FrancisFrancis Coffee Maker, try these steps: Switch off the machine, fill the tank if necessary, and switch the machine back on, waiting until all lights illuminate. Place a container under the steam wand and move the steam switch downwards, then move it downwards again. Note that you can still use the brewing functions.
What to do if water comes out of the group during brewing in FrancisFrancis X2.1 IPERESPRESSO?
If water comes out of the group during brewing with your FrancisFrancis Coffee Maker, ensure that the filter and capsule holder are correctly inserted. If the issue persists, try using a new capsule.
Why the light (E) does not turn on in FrancisFrancis X2.1 IPERESPRESSO Coffee Maker?
If the light (E) does not turn on when you switch on your FrancisFrancis Coffee Maker, check the condition of the protection switches of the power supply. Also, ensure the power cord is properly connected to both the machine and the power supply.
General| Brand | FrancisFrancis |
|---|---|
| Model | X2.1 IPERESPRESSO |
| Category | Coffee Maker |
| Language | English |
Instructions for powering on the espresso machine and initial warm-up procedures.
Step-by-step guide for brewing espresso using the machine's features and capsules.
How to use the steam wand for frothing milk or dispensing steam on supported models.
Procedure for removing limescale buildup to maintain machine performance and longevity.
