FRANCO BELGE Montfort MK2

Other manuals for FRANCO BELGE Montfort MK2

Technical Manual21 pages

Questions and Answers

K
Katherine WalkerAug 16, 2025
Why is my FRANCO BELGE Stove fire difficult to start?
- W
  Wesley CastroAug 16, 2025
  A fire in a FRANCO BELGE Stove might be difficult to start due to several reasons. It could be that the wood is green or damp; in this case, use hardwood logs that have been cut for at least two years and stored under a ventilated shelter. Another reason might be that the logs are too big; use small, very dry twigs to light the fire and split logs to maintain it. Poor quality wood, insufficient primary air (open air control), or insufficient draught (check that the flue is not obstructed and sweep it if necessary) could also be the cause. If none of these solutions work, seek advice from a chimney specialist.
E
Edgar CarlsonAug 19, 2025
What to do if my FRANCO BELGE Montfort MK2 smokes when lighting up?
- K
  Keith MorenoSep 12, 2025
  If your FRANCO BELGE Stove smokes when lighting up, it could be due to a cold flue duct. Try burning paper and kindling wood to increase the heat. Alternatively, the room might be in decompression (negative pressure). If you have mechanical ventilation, partly open a window until the fire is well established.
M
mhornAug 22, 2025
Why does my FRANCO BELGE Montfort MK2 fire burn too quickly?
- G
  Glen LeeAug 22, 2025
  A FRANCO BELGE Stove fire might burn too quickly due to too much draught. Try partially closing the top air control. If there is excessive draught, consider installing a draught stabiliser to the connector pipe and consult your dealer. Also, avoid continuously burning small wood, sticks, bundles, or carpentry offcuts (plywood, pallets), as poor quality wood can cause this issue.
C
Christian SotoAug 26, 2025
What to do if my FRANCO BELGE Stove smokes while burning?
- A
  Amanda YangAug 26, 2025
  If your FRANCO BELGE Stove smokes while burning, it could be due to insufficient draught. In this case, consult a chimney specialist. Another cause could be an obstruction in the flue, so check the flue and sweep it if necessary. A down draught might also be the reason; consider installing an anti-down draught cowl and consult your dealer. If you have mechanical ventilation, the room might be in decompression, so try partly opening a window until the fire is well established.
T
Timothy LeeAug 28, 2025
How to increase the heat output of my FRANCO BELGE Montfort MK2 Stove?
- S
  Steven WilliamsAug 28, 2025
  If your FRANCO BELGE Stove has a low heat output, it could be due to poor quality wood. Use hardwood that have a higher calorific value per cu metre, such as Yoke-elm, oak, ash, maple, birch, elm, or beech. Another cause could be poor mixing of the convection air, so check the air flow system, including the air inlet, piping, and air outlet. Also, check that the next rooms are equipped with ventilation grids to help out the hot air circulation.
C
Charles WangAug 31, 2025
Why is the fire in my FRANCO BELGE Wood stove difficult to start?
- P
  Priscilla GarciaAug 31, 2025
  If you're having trouble starting a fire in your FRANCO BELGE Wood stove, several factors could be at play. The wood might be too green or damp; try using hardwood logs that have been cut for at least two years and stored under a ventilated shelter. The logs might be too big; use small, very dry twigs to light the fire and split logs to maintain it. Poor quality wood could also be the culprit; opt for hardwoods with a higher calorific value, such as oak or birch. Ensure that there is enough primary air by opening the air control. Finally, insufficient draught could be the issue; check that the flue is not obstructed and sweep it if necessary. If all else fails, seek advice from a chimney specialist.
A
Anthony DiazSep 3, 2025
Why does my FRANCO BELGE Wood stove fire burn too quickly?
- T
  thomas99Sep 3, 2025
  If your FRANCO BELGE Wood stove fire burns too quickly, it could be due to a few reasons. Too much draught may be the cause; try partially closing the top air control. Excessive draught could also be the issue; consider installing a draught stabiliser to the connector pipe and consult your Dealer. Avoid continuously burning small wood, sticks, bundles, or carpentry offcuts, as poor quality wood accelerates the burning process.
K
Karen PorterSep 6, 2025
What to do if my FRANCO BELGE Wood stove smokes while burning?
- C
  Cheryl HallSep 6, 2025
  If your FRANCO BELGE Wood stove smokes while burning, several factors could be responsible. Insufficient draught may be the cause, so consult a chimney specialist. Check that the flue is not obstructed, sweep if necessary. Down draught could also be the issue; consider installing an anti-down draught cowl and consult your Dealer. If your room is in decompression, especially in houses equipped with Mechanical Ventilation, partly open a window until the fire is well established.
N
nandersonSep 9, 2025
What to do if my FRANCO BELGE Wood stove smokes when lighting up?
- M
  Matthew NelsonSep 9, 2025
  If your FRANCO BELGE Wood stove smokes when lighting up, the flue duct might be cold; try burning paper and kindling wood to increase heat. Alternatively, the room may be in decompression (negative pressure); in houses equipped with mechanical ventilation, partly open a window until the fire is well established.
N
Nicole GuerreroSep 12, 2025
How to improve the heat output of my FRANCO BELGE Wood stove?
- J
  James PowellSep 13, 2025
  If your FRANCO BELGE Wood stove has low heat output, it could be due to poor quality wood; use hardwood that has a higher calorific value per cu metre, such as oak, ash, or birch. Poor mixing of the convection air could also be the problem; check the air flow system, including the air inlet, piping, and air outlet. Check that the next rooms are equipped with ventilation grids to help out the hot air circulation.