Franke UK Limited
West Park, MIOC
Styal Road
Manchester
M22 5WB
Tel: +44 (0)161 436 6280
Fax: +44 (0)161 436 2180
Email info.uk@franke.com
For spare parts, servicing or any other queries,
visit www.franke.co.uk
Guarantee
Your Franke mixer has been manufactured to the high
standard you would expect of any Franke product but in the
unlikely event that you should experience any defect in the
materials or workmanship within one year of purchase, we will
replace the faulty part free of charge. This is provided the
mixer has only been used for normal domestic purposes in the
UK and that the care, installation and maintenance
instructions have been observed.
You should also retain your dated invoice as proof of purchase
to validate any claims under our guarantee.
This one year guarantee is extended to five years in the case
of the valve mechanism.
Normal wear and tear is excluded from the guarantee.
Decorative surface finishes are guaranteed for one year from
the date of purchase provided our advice concerning care has
been observed and no scouring agents have been used.
Scuffs and scratches caused by improper installation or
accidental damage are not covered by this guarantee.
Neither are slight shade variations or any damage or defect
caused by incorrect installation or abuse of the fitting.
Service
For spare parts, servicing or any other queries,
visit www.franke.co.uk
Optional tap brace
A large or heavy tap fitted to a stainless steel inset sink may
occasionally flex the sink. To counteract this, Franke has
developed an innovative tap brace that can be purchased
separately. The tap brace connects the tap to the worktop and
not just to the sink, offering additional support to the tap and
much more stability when fitted. The tap brace has a variable
collar to ensure it will fit most models of tap and can be used
on any inset stainless steel sink.
The Franke tap brace is available on request from most
kitchen retailers.
To Previous Page
Loading...
Need help?
General
