Precision
Powder Scale
Precision
Powder Scale
Product #909672
Instructions #1028773
USER MANUAL
Please read all operating instructions carefully before use. This electronic
scale is a precision instrument. With normal care and proper treatment,
it will provide years of reliable service.
ATTENTION!
• Never load the scale with more than the maximum capacity.
Overloading can permanently damage unit.
• Handle with care. Gently apply all items to be weighed onto
tray top. Although this scale is designed to be quite durable,
try to avoid rough treatment as this may permanently
damage the internal sensor
• Avoid shaking, dropping or otherwise shocking the scale.
This is a precision instrument and must be handled with care.
TROUBLESHOOTING
e primary reasons for inaccuracy or malfunction are low batteries,
incorrect calibration, overload or operating on an unstable surface. Please
keep these in mind and maintain and operate your scale properly. e scale
is a precise instrument and must be handled with care and caution.
Display Elimination of errors
Nothing Battery-symbol, [lo] or [8888] Change the batteries.
[OUT2] Recalibrate the scale as shown above.
[O-LD] You are overloading the scale.
Remove the excessive load immediately!
[LLLLL] e delicate weighing load cells have been damaged by misusing
the scale (i.e. it was shocked, dropped or overload.) You can try
recalibrating the scale. If the load cell has not been damaged
it will work again aer recalibration.
[UNST] Use the scale in a more stable position
CONTENTS
A. Precision scale
B. 2 calibration weights
C. Powder pan
D. Podium
E. Clear cover
F. Storage case (NOT SHOWN)
G. 110V power supply
H. 220V adaptor
A.
B.
C.
D.
E.
G.
H.
To Next Page
Need help?
Power
Operating Environment
Weight and Dimensions
