25
9. Repeat step 5 to rinse the ice-making system one more time.
10. Set the Power switch to the ON position. The machine will return to the regular ice-making
mode. Discard the first batch of ice.
Major Functions
1. Completely automatic operation
2. When the ice storage bin is full of ice, the machine stops making ice and proceeds to the cold
preservation stage automatically. It starts making ice again once the cubes are removed.
3. When the drainage tray on the top of the compressor is full of water, the machine stops
working and alarms at regular intervals. Only when you drain off water by unscrewing the
lower drainage nut or the back drainage nut does the machine resume working.
4. The fan motor responds to the ambient temperature. If it is cold, the motor will stop working
to keep the cooling system in good working condition.
5. A sensitive probe and accurate timer enhance the performance of the ice maker.
6. Built-in compressor protection system
To Next Page
Loading...
