Need help?Do you have a question about the Franklin Fueling Systems EVO 200 and is the answer not in the manual?
General| Manufacturer | Franklin Fueling Systems |
|---|---|
| Model | EVO 200 |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Enclosure Rating | NEMA 4X |
| Compliance | UL, cUL, ATEX |
| Category | Automatic Tank Gauge |
| Communication | Ethernet |
| Protocols | TCP/IP, Modbus |
| Product Type | Automatic Tank Gauge |
| Application | Fuel Management |
| Operating Temperature | -20°C to 60°C |
Details the primary role of EVO™ 200 and EVO™ 400 ATGs in monitoring and reporting fuel inventory and leak detection.
Outlines essential safety measures and warnings for working with FFS equipment in hazardous environments.
Step-by-step guide for connecting a PC to the ATG via the Mini USB port for easy technician access.
Instructions for connecting a PC to the console using the Ethernet port for network communication.
Details the steps for configuring a PC to automatically obtain an IP address for communication with the ATG.
Explains how to manually configure a static IP address on the PC for ATG communication.
Guides users through recalibrating the touch screen for accurate input recognition.
Explains how to configure network settings such as IP address, subnet mask, and gateway for communication.
Provides instructions on how to access the console's web interface using a web browser.
Details the process for modifying system parameters through the web interface.
Explains how to download the console setup file to a PC for backup purposes.
Details the process for uploading a backup configuration file to restore settings or copy them to another console.
Allows selection of menu options for language and regional formats.
Details the process for setting up the System ID, including site name and physical address.
Lists system-level alarms, their descriptions, and recommended troubleshooting actions.
To Next Page
