Do you have a question about the Franklin Wireless R850 and is the answer not in the manual?
Press and hold the power button until 'Welcome' appears. Short press to view Wi-Fi name and password.
Press and hold the power button until 'Goodbye' appears. Always turn off when not in use.
Check battery icon. Plug in if low (approx. 3 hours). Do not overcharge; remove when full.
Place near a window, 4-6 feet from other devices, in clear space. Connect minimum devices.
Select WLAN icon, choose hotspot name, enter password, and click Connect/Next.
Go to System Preferences > Network > Wi-Fi. Select hotspot, enter password, and click Join.
Go to Settings > Wi-Fi. Turn Wi-Fi on, select hotspot name, enter password, and tap Join.
Go to Menu > Settings > Wi-Fi. Turn Wi-Fi on, select hotspot name, enter password, and Connect.
Press and hold the power button until 'Welcome' appears. Short press to view Wi-Fi name and password.
Press and hold the power button until 'Goodbye' appears. Always turn off when not in use.
Check battery icon. Plug in if low (approx. 3 hours). Do not overcharge; remove when full.
Place near a window, 4-6 feet from other devices, in clear space. Connect minimum devices.
Select WLAN icon, choose hotspot name, enter password, and click Connect/Next.
Go to System Preferences > Network > Wi-Fi. Select hotspot, enter password, and click Join.
Go to Settings > Wi-Fi. Turn Wi-Fi on, select hotspot name, enter password, and tap Join.
Go to Menu > Settings > Wi-Fi. Turn Wi-Fi on, select hotspot name, enter password, and Connect.
| Model | R850 |
|---|---|
| Battery Capacity | 3000 mAh |
| Maximum Number of Connected Devices | 10 |
| Wireless Standards | 802.11b/g/n |
| Frequency Band | 2.4 GHz, 5 GHz |
| Max Theoretical Downlink Speed | 150 Mbps |
| Supported Networks | 4G LTE, UMTS |
| LTE Bands | 2, 4, 5, 12, 13, 25, 26 |
| UMTS Bands | B1/B2/B4/B5 |
| Display | LCD |
| Security Features | WPA, WPA2 |
Loading...