Franklin 2719 User Manual

Return Trainer
Pitch Target
DELUXE 2 in 1
Throwing & Pitching
Combo Set
Item #2719
Step 6:
Before putting the net on the frame, secure part (2), “Infinite Adjustment” system by
screwing onto pole counter clockwise. To attach net part (11) to frame, spread out net
and find red tabs attached to net. The red tabs indicate the corners of the net. To attach
net, start with one corner and attach with one bungee, then attach the other three
corners. Next, start at the top of the frame and attach the bungees across the top
spreading them evenly. Attach the bungees on one side spreading them evenly. Repeat
on bottom and then on final side.
Step 8:
Attach target ribbon part
(12) by weaving through
net and tying off at
ends.
Step 7:
To attach bungees to net
hold plastic ball in place
and wrap free end around
net and side tube. Loop
free bungee around plastic
ball.
For Replacement Parts Call 1-800-225-8649
MA Residents Call 1-781-341-5178
FRANKLIN SPORTS INC. Stoughton, MA 02072 www.franklinsports.com
Note: Do not extend
“Infinite Angle” adjustment
system beyond red
indicator mark on tube.
TOOLS REQUIRED:
FLAT OR PHILLIPS SCREWDRIVER
Step 9:
Attach catcher target, part
(13), to bunees on other side
of return. Place bungee
hooks into metal holes
around the outside of target
screen.
Step 10:
Attach collection bag, part
(14), to clips on front of
catcher target.
Step 11:
To draw back target,
attach back straps to the
back brace pole.
ISO 4/08
Use extreme caution when assembling
the net to the frame. The bungees will
be under extreme tension and must be
attached carefully. Adult assembly is
strongly recommended.
Note: To fold flat for easy storage, depress push
pins on part (6) and release support arm. Unit
will now fold flat.

Franklin 2719 Specifications

General

Brand	Franklin
Model	2719
Category	Accessories
Language	English

Summary

Deluxe 2 in 1 Throwing & Pitching Combo Set Assembly

Safety Warning During Assembly

Exercise extreme caution when assembling the net to the frame due to bungee tension. Adult assembly is strongly recommended.

Attaching the Net to the Frame

Secure the 'Infinite Adjustment' system and attach the net to the frame using bungees, starting with corners and spreading evenly.

Securing Bungees and Components

Attach bungees to net, then attach catcher target and collection bag, and finally back straps to the brace pole.

Frame Assembly Steps

Step 1: Net Frame Side Preparation

Make net frame side by placing part (3) into part (4) and snapping push pins into place.

Step 2: Constructing the Net Frame

Use 'U' shaped tubes and side poles to create a rectangular net frame shape.

Step 3: Base Assembly

Attach hooks to a 'U' tube, connect side supports to the base using bolts and wing nuts.

Step 4: Connecting Net Frame to Base

Place net frame between base open ends, align holes, and attach using bolts and wing nuts.

Step 5: Attaching Support Tubes

Attach the bottom of part (2) to the back of the base by inserting part (6) into part (2).