FRC ICA900 - Figure 2. ICA900 Speaker Box Dimensions

ICA900 Rev150324
7
Figure 2. ICA900 Speaker Box Dimensions
Surface Mounted
Bracket Mounted
Note: The mounting bracket can be removed by unscrewing the adjustment
knobs at the side of the speaker box. The rubber bushing is installed
between the bracket and the speaker box.
Panel mounting
holes are clearance
for 10-32 screws.
Use four 10-32 screws through
panel into tapped holes in box.
Ensure that the screws do not
bottom out in the hole.
4 1/2"
5 1/8"
5 1/8"
C
L
2 1/2"
2 1/4"
4 1/2"
1/2"
3/4" Diameter hole
for the cable.
4 5/16"
3/4"
6 5/8"
5 5/8"
2 1/2"
Rubber
Bushing
Adjustment
Knob
Mounting
Bracket
Mounting holes are
clearance or tapped
for 10-32 screws.
Panel