8
1.4. Warnings
Danger of electric shock and re
Before using easyWallbox, read the contents of this manual carefully to
acquire familiarity with the instructions for use and the safety indications.
Before starting installation, ensure that easyWallbox is not connected to
any power supply. Any installation, maintenance and dismantling operation
should only be done when disconnected from the power supply.
Before connecting to a power supply, make sure that the electric socket is
installed correctly, with a proper earth connection and in compliance with
local and international standards.
Before installing or using the device, make sure that no damage has
occurred to any component. Damaged components can lead to
electrocution, short circuits, and re due to overheating. A device with
damage or defects must not be used.
Install easyWallboxaway from petrol cans or combustible substances
in general.
Before carrying out any maintenance operation, ensure that the power
supply is o.
Before putting back or moving easyWallbox, ensure that the device is not
attached to the power supply.
Use of easyWallbox must be limited to the specic applications it is
intended for.
Installation, maintenance, or repairs not made correctly may lead to risks
for the user. Please ensure that easyWallbox is only used in the correct
operating conditions.
The device must be connected to a power supply compliant with local
and international standards and all the technical requirements
indicated in this manual.
To Next Page
Loading...
